Flight Simulator Controller Vernier Throttle, Prop, Mixture and Flaps

Have been using this control combination for about a month now and I have to say "it's good stuff" - Works very well , is very sensitive but easy to control and is built well, a good match to the trim controller.

Excellent product

A very fast process. The order was shipped very quickly. The item itself is very light but does what it has to do. I have got what I wanted for cheap price

Excellent product! solid build and functions flawlessly!

Awesome quality and price

TPM controller arrived yesterday and it is awesome. Solid build and feels like a Cessna controller. Happy Happy Joy Joy!

This was my second time ordering from Flight Sim Stuff, and my experience was even better than the first time (which was pretty great!) First, the controller functions perfectly (very close to the performance and feel of the C172 I fly) and has a tidy, streamlined look. I upgraded the trim wheel to the one that has more turns of the wheel, and what a difference. It feels so realistic to me. And to top it all off, Shawn was uncommonly courteous and responsive when I had questions about my order and about set up. An "Alpha+" all around!

I was a kid who loved Flight Simulator so much that Christmas 20+ years ago landed me a yoke and pedals, but that was it. Now working toward my actual Private Pilot License, I wanted to get back to flight sim-ing to build some confidence and muscle memory... but that meant adding some controls. Found Flight Sim Stuff online and so grateful I did. First purchased a trim wheel (fantastic... great size, turns smooth, has actual stops), and then grabbed a Cessna-style throttle with mixture and flaps switch... and a modified carb heat knob instead of prop pitch. It's wonderful. Easy to set up. Works great. Customer support is responsive and it shipped fast. I'm not going to drop thousands on a full simulator setup to fly from the basement... I want to get into the air for real, but adding these little controls make a world of a difference. Very pleased and would recommend

Shawn was extremely helpful, responding to my questions very quickly. I purchased the TPM & Flaps controller with the Carb Heat option as I am learning in a Cessna 152. The Product is great, allowing to practice real world procedures with controls that mimic the real plane. The controls are well made, sturdy, with a great feel to them. The unit clamps very solidly to my table. I would definitely purchase from Shawn again. He is so friendly and helpful. When setting up the Carb heat you need to assign a Positive & Negative axis.

Cessna style controls so I can simulate real aircraft at home for training are kind of rare compared with airliner equipment, so these were exactly what I was looking for. Customer service has been responsive and high quality also!

Great product, it has the feel of the controls in a Cessna 152, 172 or 182. Best bang for the buck. It doesn’t have locking controls or the push button, but it simulates the controls enough to enjoy the experience of a Cessna control panel. I’m so happy with this company I purchased their stand alone Trim Wheel.
I experienced a small issue and contacted the company via email. Very fast response and resolution. Every thing was resolved within 1.5 hours of the first contact. Who does that nowadays.

Mostly used in FSX for c172

However some delay with custom in Denmark...

Throttle, Propeller, Mixture (TPM) and Flaps Controller For Flight Simulators - Removable Desktop Mount

Great feel to the axises and flap lever has a satisfying click.

This is an awesome add to my flight sim experience. It replaces the Logitech TPM levers that worked fine but they were not replica of the flight controls in my 182. Yes, they are made of plastic (3d Printing) but it is sturdy and feels pretty close to the real thing (as close as you can get for 100 bucks). I have it married with the Honeycomb Yoke and the Turtle Beach VelociyOne Rudders set-up that makes for a pretty good FlightSim platform. I would highly recommend this add to your flight sim.

Great customer service !
Product does the job, has friction lock but no fine tuning twist… It is what I needed for my mid grade sim. a good price also. Feels robust enough.

Very realistic TPM and flap controller feel. I fly X-plane 12 to keep my IFR skills honed. The unit was easy to install using the enclosed instructions, and I found the 3D print quality top-notch.

I got the TPM without clamp.
I mounted it to my GT Omega Art cockpit . It’s very sturdy and the setup to configure the controls in MSFS 2020 worked perfect the first time. The controls action feels real and in the sim the same. Ordered a second unit with a flap switch for later use direct from the website. Both units were sent out right away, arrived quick and were packaged very well.can’t go wrong here! Would like to see a single push pull throttle unit made, I would get that for sure.

I am a student pilot who uses MS Flight Simulator in full immersion with a VR headset, a Honeycomb yoke and pedals. Adding Flight Sim Stuff’s TPM with the flap controller and the big trim wheel has completed my setup, and greatly enhanced the flying experience. I was astonished at the look and feel, and quality of the 3D printed boxes, wheel and handles. Thank you for bringing my flight simulation experience to the next level of realism.

Happy to report the controller installed in X-Plane 11 with no problem at all, calibration was easy, and it works great. Even the control friction is perfect. Great product!

Absolutely five star gear for the price, but with a few tweaks this would be amazing. I ordered the TPM with flaps but without the small trim wheel. I ordered the large trim wheel separately so I could mount the trim wheel under my desk directly above the TPM so the configuration matches a real 172. The setup and configuration where very simple and the directions were easy to follow, one note on configuring, if you use Spad.next you will need to calibrate with that as well as the windows calibration. The things I wish were improved/added would be the addition of mounting points on the top and bottom of each component that match up with saitek gauges and panels (be careful drilling your own there are some electronics right under the top lid) and the amount of turns for full deflection on the trim wheel is pretty excessive. Other than that, don't waste your money buying anything else.

I ordered the TPM module but requested some changes to include the fixing nuts and swapping the prop lever for a carb heat knob and nothing was too much trouble. Having now received the item I’m impressed with the quality achieved from 3d printing and the resistance offered by the vernier style levers is also great. I will be recommending to other flight sum friends!

Thanks for the product, im very happy with them. I really recomended, i thing is the best price quality. Im from Chile, no shipping problems, come very good packed, from first view i was happy. Is very recomendable for who search a TPM with flaps at good price and very near realy feel. Is robust box 3d printed with 3 tpm with 3 strong steel axis, similar feeleng and friction at real TPM, the knobs are 3d printed and they are no like a real one but very similar, so they do the work excelent. they don have friction control like the real one but i thing is no necesary beacause the friction that have are like real one. Very happy and gratefully, i will stand attend for new products.

I’ve been hesitant to upgrade my Logitech throttle quadrant because of cost but always wanted a tpm controller. When I found this one I decided to take a chance, the price was good and it seemed to have great reviews. I was glad I did. It was too simple to plug in and setup. Now my flight sim is more like my actual aircraft I fly. Great piece of equipment.

I had been looking for throttles and flap switch to simulate my experience in a Tecnam P92. There are much more expensive options out there but this is every bit as good and the big selling point for me was the flaps switch. Excellent communication and customer support. Will even take custom orders. 10/10. Recommend every time.

Needed something to better match my RV-7A configuration, so this paired with my Thrustmaster Stick works great in XPlane 11. Choose the TPM model with flaps but no trim wheel since I have electric trim. Easy to configure with XPlane and great feel and smooth response in the simulator.